PrimaCreator Air Tight Filament Storage Set
Sealing your filament spools in a vacuum sealed bag is a great way to protect them. The bags stops dirt, dust and most importantly – moisture for getting to your filament. Keeping your filament sealed and dry is the best way to protect it and preserve it’s properties. This is especially true for hygroscopic filaments such as Nylon (PA) and PVA.
By properly storing your filaments sealed and dry will help prolong their shelf life, and make sure the quality of your prints are always as good as possible.
Easy to use:
The storage kit is very easy to use. Put your filament spool in a vacuum bag, add a silica gel bag and a humidity indicator, seal the bag and use the pump to empty out the air. Keep the air valve against a flat surface to help keep a tight seal with the pump. The valve is self sealing for easier use.
Make sure to position the humidity indicator so that you can keep an eye on it. As long as the dots on the indicator stays brown, your filament is safe and dry. If the indicator starts turning blue, there could be moisture in the bag, and you should repack the spool with a new silica gel bag.
The vacuum bags are re-sealable, and can be reused.
Each set contains:
- 1x Vacuum Pump
- 10x Vacuum Bags – 350 x 310 mm (Suitable for most 1 kg filament spools)
- 15x Humidity Indicators
- 15x Silica Gel Bags.
Additional vacuum bags, humidity indicators and silica gel bags can be bought separately.
Whats Included
• 1x Vacuum Pump
• 10x Vacuum Bags – 350 x 310 mm (Suitable for most 1 kg filament spools)
• 15x Humidity Indicators
• 15x Silica Gel Bags.
| Weight | 1.3 kg |
|---|
Delivery & support
This item is dispatched directly by our fulfilment partner on behalf of Layer3D. The carrier label shows our partner’s warehouse address. Your parcel may arrive without a printed delivery note. Layer3D remains your point of contact for your order and support.
Same-day dispatch has a 12 noon cut-off on working days and is subject to stock availability, payment clearance and order processing. This is a dispatch cut-off, not a guaranteed delivery date. Tracking information is passed to Layer3D by our fulfilment partner.
Delivery is calculated using packed weight: up to 2.5kg £4.95; over 2.5kg to 5kg £6.95; over 5kg to 25kg £8.95; over 25kg to 100kg £13.95. There is no additional island surcharge for these deliveries. Orders supplied from more than one warehouse may arrive separately and incur separate delivery charges.
Any single item with a packed weight of 60kg or more requires a pallet-delivery quote before ordering. Orders over 100kg and other flagged large items also require a quote. Contact info@layer3d.org.uk so we can confirm the delivery cost.
For setup help, faults or returns, contact Layer3D first. Our supplier provides replacement parts free of charge for confirmed manufacturing defects covered by its standard warranty. This does not limit your statutory rights or other remedies available to you. Please retain the original packaging where possible and see our Returns & Refunds policy for cancellation and return instructions.
Reviews
There are no reviews yet.